€62.48 Vat excl.
The converter Orion Tr Dc-Dc is used to convert the input voltage 10-15V in 12.2V Adjustable output for a maximum output of 9 A. (110w)
 |
Converter Voltage DC-DC Orion-TR 12/12-9A 110W Victron Energy In. 8-17V |
|
The converter Orion Tr Dc-Dc is used to convert the input voltage 10-15V in 12.2V Adjustable output for a maximum output of 9 A. (110w)
| Modell: ORI121210110R |
| Degree of protection: IP43 |
| Protection against overheating and reverse polarity: Yes |
| Wide range of input voltage: da 8V a 17V |
| galvanically isolated: Yes |
| Casing in blue color |
 |
2 Year Warranty |
| Input voltage range | 10-15 VDC |
| Stop Voltage | 7V |
| Starting voltage | 7,5V |
| Internal consumption | < 45 mA |
| DC output | 12,5V |
| Maximum output current | 9A |
| Operating Temperature Range | -20°C a 55°C |
| Efficiency | 87% |
| Weight | 420g |
| Dimensions (h x w x d) in mm | 100 x 113 x 47 mm |
You can set the output voltage between 10V and 15V by turning the potentiometer (use a flathead screwdriver nr 01 - 3.5mmx0.75mm) .The default is 12.2V. Without load the value may be slightly higher.
Imporant note: Always connect a small load when the output voltage setting. If you set it not, when a load is applied the output will be lower. Turn counter clockwise to decrease tension. Turn clockwise to increase the tension.
Use the Orion Tr converter in a cool, dry, well-ventilated.
Assembly instructions:
First of all connect the power cable "negative" to one of the Orion negative terminals. The two negative terminals are connected together. Incorrect connection of the negative pole may cause output overvoltage and then connect the remaining cables. It is mandatory to enter an external 9A fuse input and output plus side.
 |
Downloads |
||||||||||||||||
|
|||||||||||||||||
 |
Assistance |
||||||||||
|
|||||||||||
You might also like
